Saturday, June 18, 2011
Testing the significance of mediating effects with WarpPLS using the Preacher & Hayes approach
This post refers to the use of WarpPLS to test a mediating effect using what is often referred to as the Preacher and Hayes approach. This approach employs the Sobel's standard error method (for a recent discussion, see: Kock, 2013). You can also test mediating effects directly with WarpPLS, using indirect and total effect outputs:
http://warppls.blogspot.com/2013/04/testing-mediating-effects-directly-with.html
Previously I also discussed on this blog the classic approach proposed by Baron & Kenny (1986) to test the significance of mediating effects with WarpPLS.
An approach that is an alternative to Baron & Kenny's (1986) approach has been proposed by Preacher & Hayes (2004) to test the significance of mediating effects. This approach has been further extended by Hayes & Preacher (2010) for nonlinear relationships.
These approaches are implemented through an Excel spreadsheet available from the “Resources” area of the WarpPLS.com site, under “Excel files”. The spreadsheet, which implements the Sobel's standard error method, can be used with coefficients generated based on linear and nonlinear analyses.
The Excel spreadsheet above takes as inputs coefficients generated by WarpPLS, including path coefficients and their standard errors. The formulas used in it are discussed in a recent publication (Kock, 2014). The outputs are Sobel’s standard errors, product path coefficients, as well as T and P values, for mediating effects.
References
Baron, R.M., & Kenny, D.A. (1986). The moderator–mediator variable distinction in social psychological research: Conceptual, strategic, and statistical considerations. Journal of Personality & Social Psychology, 51(6), 1173-1182.
Hayes, A.F., & Preacher, K.J. (2010). Quantifying and testing indirect effects in simple mediation models when the constituent paths are nonlinear. Multivariate Behavioral Research, 45(4), 627-660.
Kock, N. (2014). Advanced mediating effects tests, multi-group analyses, and measurement model assessments in PLS-based SEM. International Journal of e-Collaboration, 10(3), 1-13.
(http://www.scriptwarp.com/warppls/pubs/Kock_2014_UseSEsESsLoadsWeightsSEM.pdf)
Preacher, K.J., & Hayes, A.F. (2004). SPSS and SAS procedures for estimating indirect effects in simple mediation models. Behavior Research Methods, Instruments, & Computers, 36 (4), 717-731.
Multi-group analysis with WarpPLS: Comparing path coefficients for two or more group samples
Starting in version 6.0 of WarpPLS, the menu options “Explore multi-group analyses” and “Explore measurement invariance” allow you to conduct analyses where the data is segmented in various groups, all possible combinations of pairs of groups are generated, and each pair of groups is compared. In multi-group analyses normally path coefficients are compared, whereas in measurement invariance assessment the foci of comparison are loadings and/or weights. The grouping variables can be unstandardized indicators, standardized indicators, and labels. These types of analyzes can also be conducted via the new menu option “Explore full latent growth”, which presents several advantages (as discussed in the WarpPLS User Manual).
Related YouTube videos:
Explore Multi-Group Analyses in WarpPLS
Explore Measurement Invariance in WarpPLS
The text below is for an older version of this post. It discusses other approaches to multi-group analysis that are only partially automated, and that are thus more time-consuming to implement.
***
I previously discussed on this post multi-group analysis with WarpPLS from the perspective of comparing means of two or more groups. This is also explored in an article titled: Using WarpPLS in e-collaboration studies: What if I have only one group and one condition?
A different type of multi-group analysis would be one in which the same model is analyzed for two or more different samples, where each sample refers to a data group.
For example, a researcher could test the same model with data from the USA and Mexico. In this case, two project files would be used, and the goal of the multi-group analysis would be to assess whether the path coefficients differ significantly across groups.
An approach to conduct this type of multi-group analysis, employing the pooled and Satterthwaite standard error methods, is discussed in a recent publication (Kock, 2014). This approach is implemented through an Excel spreadsheet available from the “Resources” area of the WarpPLS.com site, under “Excel files”.
The Excel spreadsheet above takes as inputs coefficients generated by WarpPLS, including path coefficients and their standard errors. The outputs are T and P values for each pair of coefficients being compared. The formulas used in it are discussed in a recent publication (Kock, 2014).
Reference
Kock, N. (2014). Advanced mediating effects tests, multi-group analyses, and measurement model assessments in PLS-based SEM. International Journal of e-Collaboration, 10(3), 1-13.
Labels:
group samples,
multi-group analysis,
P value,
path coefficient,
warppls
Friday, April 22, 2011
Using WarpPLS in E-Collaboration Studies: Descriptive Statistics, Settings, and Key Analysis Results
A new article discussing WarpPLS is available. The article is titled “Using WarpPLS in E-Collaboration Studies: Descriptive Statistics, Settings, and Key Analysis Results”. It has been recently published in the International Journal of e-Collaboration. A full text version of the article is available here as a PDF file. Below is the abstract of the article.
This is a follow-up on a previous article (Kock, 2010b) discussing the five main steps through which a nonlinear structural equation modeling analysis could be conducted with the software WarpPLS (warppls.com). Both this and the previous article use data from the same e-collaboration study as a basis for the discussion of important WarpPLS features. Unlike in the previous article, the focus here is on specific features related to saving and analyzing grouped descriptive statistics, viewing and changing analysis algorithm and resampling settings, and viewing and saving the various minor and major results of the analysis. Even though its focus is on an e-collaboration study this article contributes to the broad literature on multivariate analysis methods, in addition to the more specific research literature on e-collaboration. The reason for this is that the vast majority of relationships between variables, in investigations of both natural and behavioral phenomena, are nonlinear; usually taking the form of U and S curves. Structural equation modeling software tools, whether variance- or covariance-based, typically do not estimate coefficients of association based on nonlinear analysis algorithms. WarpPLS is an exception in this respect. Without taking nonlinearity into consideration, the results can be misleading; especially in complex and multi-factorial situations such as those stemming from e-collaboration in virtual teams.
Wednesday, April 20, 2011
Transitioning from WarpPLS 1.0 to 2.0
Transitioning from version 1.0 to 2.0 of WarpPLS is very easy. Even though both can be installed and ran on the same computer, and should not interfere with each other, I recommend using only the latest version.
There is no need to uninstall version 1.0, but if you want to do so you can follow the instructions at the beginning of the User Manual for version 1.0.
Version 1.0 users can enter the same license information as for version 1.0; it will work for version 2.0 for the remainder of their license periods.
Project files generated with version 1.0 can be used with version 2.0, but only after running Step 5 again. This is needed because version 2.0 generates additional estimates.
Enjoy!
There is no need to uninstall version 1.0, but if you want to do so you can follow the instructions at the beginning of the User Manual for version 1.0.
Version 1.0 users can enter the same license information as for version 1.0; it will work for version 2.0 for the remainder of their license periods.
Project files generated with version 1.0 can be used with version 2.0, but only after running Step 5 again. This is needed because version 2.0 generates additional estimates.
Enjoy!
Friday, April 8, 2011
Two new WarpPLS workshops in April and May of 2011
PLS-SEM.com will conduct two new online workshops on WarpPLS in April and May of 2011!
For more information on these and other WarpPLS workshops please visit:
http://pls-sem.com
For more information on these and other WarpPLS workshops please visit:
http://pls-sem.com
Wednesday, April 6, 2011
Version 2.0 of WarpPLS is now available!
Version 2.0 of WarpPLS is now available!
Download and install it for a free trial from:
http://warppls.com
Enjoy!
Download and install it for a free trial from:
http://warppls.com
Enjoy!
Friday, March 11, 2011
Version 2.0 of WarpPLS will be available soon!
Version 2.0 of WarpPLS is currently being tested, and will be available soon, barring any unexpected problems.
Here is a list of new features in this version:
- APC fit index. The algorithm that calculates the average path coefficient (APC) was modified to correct a problem that was leading it to be underestimated for some models.
- Drag-and-drop user interface. Latent variables can now be moved around, during the model creation/editing step, via drag-and-drop actions.
- Help menu options. Most menus now provide one-click access to Web resources, including Web videos and the WarpPLS blog.
- Incremental code optimization. At several points the code was optimized for speed.
- Loadings and cross-loadings. The software now provides the following tables in connection with loadings and cross-loadings, from a confirmatory factor analysis, on both the screen and model estimates .txt file: combined loadings and cross-loadings, pattern loadings and cross-loadings, and structure loadings and cross-loadings.
- Moderating relationship visualization. The software now shows two plots for moderating relationships, referring to low and high values of the moderating variable. They can be viewed through the “View/plot linear and nonlinear relationships among latent variables” option, under “View and save results”.
- Saving model diagrams as .jpg files. The software now allows for model diagrams, with and without results, to be saved into .jpg files for later inclusion in reports.
- Standard errors for path coefficients. The software now reports standard errors for path coefficients, on both the screen and the model estimates .txt file. These allow for newer mediating effect tests to be conducted, in addition to Baron & Kenny’s (1986) test. The newer tests include those proposed by Preacher & Hayes (2004), and Hayes & Preacher (2010). These citations are fully referenced in the newest version of the User Manual.
- Support for .xlsx Excel files. The software now reads new .xlsx Excel files. Excel workbooks with multiple sheets can also be used, in which case the sheet with the data to be analyzed must be the first in the workbook.
- System.wrp file. The extension of the “System.sys” file was changed, and the content of the file was modified to store a few additional parameters necessary for code optimization. The file is now called “System.wrp”.
- VIFs for formative indicators. The software now calculates variance inflation factors (VIFs) for the indicators of formative latent variables, which can be used for indicator redundancy assessment.
Stay tuned!
Here is a list of new features in this version:
- APC fit index. The algorithm that calculates the average path coefficient (APC) was modified to correct a problem that was leading it to be underestimated for some models.
- Drag-and-drop user interface. Latent variables can now be moved around, during the model creation/editing step, via drag-and-drop actions.
- Help menu options. Most menus now provide one-click access to Web resources, including Web videos and the WarpPLS blog.
- Incremental code optimization. At several points the code was optimized for speed.
- Loadings and cross-loadings. The software now provides the following tables in connection with loadings and cross-loadings, from a confirmatory factor analysis, on both the screen and model estimates .txt file: combined loadings and cross-loadings, pattern loadings and cross-loadings, and structure loadings and cross-loadings.
- Moderating relationship visualization. The software now shows two plots for moderating relationships, referring to low and high values of the moderating variable. They can be viewed through the “View/plot linear and nonlinear relationships among latent variables” option, under “View and save results”.
- Saving model diagrams as .jpg files. The software now allows for model diagrams, with and without results, to be saved into .jpg files for later inclusion in reports.
- Standard errors for path coefficients. The software now reports standard errors for path coefficients, on both the screen and the model estimates .txt file. These allow for newer mediating effect tests to be conducted, in addition to Baron & Kenny’s (1986) test. The newer tests include those proposed by Preacher & Hayes (2004), and Hayes & Preacher (2010). These citations are fully referenced in the newest version of the User Manual.
- Support for .xlsx Excel files. The software now reads new .xlsx Excel files. Excel workbooks with multiple sheets can also be used, in which case the sheet with the data to be analyzed must be the first in the workbook.
- System.wrp file. The extension of the “System.sys” file was changed, and the content of the file was modified to store a few additional parameters necessary for code optimization. The file is now called “System.wrp”.
- VIFs for formative indicators. The software now calculates variance inflation factors (VIFs) for the indicators of formative latent variables, which can be used for indicator redundancy assessment.
Stay tuned!
Subscribe to:
Posts (Atom)